If a customer complains about the above problem, this could be caused by a defective torque sensor. The customer notices this defect by an increased steering effort . In addition, the error codes C 1400 and C1413 (torque sensor, signal error, torque sensor, malfunction) may be stored. Before replacing the torque sensor, the connectors at the control unit of the electric power steering should be checked for proper seat (see illustration). The above problem may also be caused by a poor contact.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.