Ford Ranger - new light source does not work

Data sheet
ManufacturerFord
ModelRanger
Year of manufacture2012
SymptomsNew light source does not work

Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Ford Ranger - new light source does not work

In the case of the above-mentioned vehicles, it may happen that a replaced, new light source does not work. We have already noticed on many vehicles that, after changing the light source, the ignition has to be switched off and on once so that the function can be restored. With this kind of vehicle, the control unit switches off the function if the current consumption of the light source is too high (e.g. if the filament burns out). In order to restore proper functioning, the fault memory has to be deleted after changing the light source.


THIS MAY ALSO BE OF INTEREST TO YOU

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.