Lancia Ypsilon 843 - Malfunction "Third stop light" | HELLA

If the Lancia Ypsilon (Fig.1) is found to have a fault or partial failure (Fig.2) affecting the "third" stop light, the possible cause may be individual defective light sources.

Fig.1

We recommend the following procedure:

• Completely switch off the electrical system.
• Remove the faulty stop light. To do so, remove the covers (Fig.3) and unlock the clips (Fig.4).
• Then remove the light unit (Fig.5) and unplug the connector.

Fig.2

Fig.3

Fig.4

Fig.5

• Disconnect the bulb holder from the housing
• Remove the faulty bulbs and replace
• Re-assemble the third stop light in reverse order and install.

Then carry out a function test.

Then carry out a function test.

Spare parts required: 8GP 938 026-001 (W 2.3 W)

Note

To ensure a constant light pattern, we recommend replacing all bulbs in this situation.

Fig.6