If the above problem is identified, one possible cause may be a defective electronic control unit for the electrically-powered swivel tow bar.
In order to exclude other causes of malfunction, the surrounding area in the vicinity of the tow bar must be visually inspected for other kinds of damage and then repaired if necessary.
If no further errors can be detected, then the control unit has to be replaced.
-OE article number of control unit: VPLGT0215
Finally, a test drive should be undertaken in order to run a check on the repair work.
Please note that such repair work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Caution: Electric vehicle!
High-voltage components - risk of accident and injury (electric shock)!
Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.