If the above-mentioned problem is detected, one possible cause may be the windshield wiper system and/or the wiper blades.
In such a case a faulty wiper arm (on the driver's side) is responsible for the noise generation.
First inspect the windshield wiper mechanism in order to check for any other form of malfunctioning and then repair if necessary.
Replace windshield wiper arm and also the wiper blade (on the driver's side) in accordance with the vehicle manufacturer's instructions.
- Wiper arm (right) OE no. 76600-SJA-E02
- Wiper arm (left) OE No. 76600-SJA-G02
- Wiper blade (right) OE No. 76620-SJA-E02
- Wiper blade (left) OE no. 76620-SJA-G02
Finally a test drive should be undertaken in order to run a check on the repair work.
Please note that such repair work should only be carried out by an authorized specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
Important safety note Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.