Fiat Grande Punto - engine does not start and instrument cluster does not function

Data sheet
ManufacturerFiat
ModelGrande Punto (199)
Year of manufacture2005 - 2012
SymptomsEngine does not start, instrument cluster dead

Important safety information The technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.

Please note: Check ground connection

If the engine does not start and / or the instrument cluster remains dead when the ignition is switched on with the above-mentioned vehicles, the cause could be a defective ground connection in the engine compartment. In order to remedy this, the ground connection from the battery to the body and also the connection from the body to the gearbox / engine (see picture) should be checked. When carrying out such checks, it is important to loosen the connections and examine both the cables and the contact surfaces most closely.

IMPORTANT

If necessary, the ground cables must be replaced, the contact surfaces cleaned and protected against corrosion.


THIS MAY ALSO BE OF INTEREST TO YOU

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.