K-LED 1.2
Hella Municipal
K-LED 1.2

K-LED 1.2

05/13/2019
K_LED_1_2_Highlight_Municipal_HELLA%5b1%5d
K-LED 1.2

K-LED 1.2

05/13/2019
K_LED_1_2_Costumer_Benefit_Municipal_HELLA%5b1%5d
K-LED 1.2

K-LED 1.2

05/13/2019
K_LED_1_2_Technical_Data_Municipal_HELLA%5b1%5d

The K-LED 1.2 is another innovative LED beacon from HELLA. The double lighting system has a large light exit area and thus provides a high warning effect, which is generated by a flashing or rotating signal, depending on the variant. The K-LED 1.2, as per the other products of the K-LED series, is completely free of moving parts. The dome is made of impact-resistant polycarbonate and is therefore particularly resistant to shocks. Wireless signals are not disrupted, thanks to the high EMC resistance of the K-LED 1.2. The beacon satisfies the requirements of IP 6K7 and IP 6K9K and is dustproof and resistant to high-pressure cleaning. In addition, brief immersion in water is also possible.

The K-LED 1.2 is available in three mounting variants: fixed attachment (Ø 130 mm and Ø 150 mm), pipe socket and magnetic attachment.

In addition to variants with yellow domes, versions with red and blue domes are also available.

05/13/2019

Twice as good: the new, innovative K-LED 1.2 from HELLA has a double lighting system with a large light exit area and thus ensures a particularly high warning effect - important for the safety of all road users. The choice between a flashing and a rotating variant enables a particularly wide range of applications to be covered.
As with the other beacons in the K-LED series, the light signal for the K-LED 1.2 is generated completely without moving parts. This provides the user with several advantages: A failure risk due to mechanical defects is significantly reduced, the regular maintenance of moving parts is not necessary. This also applies to the LED technology used: this is maintenance-free, particularly durable and also has a high energy and therefore cost efficiency.
The K-LED 1.2 satisfies the high requirements in the field of municipal emergency vehicles with its extremely robust construction, impact-resistant hood and IP 6K7 protection class. As a result, the K-LED 1.2 is optimally protected against external influences such as impacts and blows as well as against moisture and penetrating humidity.
The K-LED is therefore predestined for use, for example, on refuse collection vehicles, clearing vehicles or sweepers – in other words, wherever an optimum warning effect, long functional life and high resistance are required.

05/13/2019

Rated voltage (UN): Multi-volt

Operating voltage (UB): 10 - 30 V

Total current consumption: Rotating approx. 1.6 A (12 V), approx. 0.8 A (24 V); flashing approx. 1.8 A (12 V), approx. 0.9 A (24 V)

Maximum power consumption: Rotating approx. 20 W; flashing approx. 22 W

Dome: Polycarbonate

Operating position: Upright

Temperature range: -40°C to +60°C

Reverse polarity protection: Yes

Protection class: IP 6K7, IP 6K9K

Interference suppression: Tested in accordance with CISPR 25

Type-tested: Yes

Interference suppression (CISPR25): Conducted Class 5

Approval: GGVSE / ADR

SAE: SAE J845 Class 1

Download

PDF

05/13/2019
  • Print
LED calculator
Calculate your savings potential with the LED calculator

Identify savings potential quickly: with the HELLA LED calculator.

OWS7 configurator
Configure your optical warning system.

Assemble your individual OW7 quickly and easily.

ELIVER
With Eliver, you will find the best beacon for your needs.

Interactively compare HELLA beacons, work lights and auxiliary lamps.

Module switch configurator