Intelligent Battery Sensor
09/21/2017
Intelligent Battery Sensor (IBS)
- Accurate measurement of voltage, current, and temperature battery parameters
- Determination of the state of charge (SOC), state of health (SOH), and state of function (SOF) battery condition parameters
- For use in starter, gel and AGM batteries to monitor in-vehicle starter or consumer batteries.
- Direct integration into the vehicle electric system via standardized LIN protocol
- Key element of energy management
Customer Benefits
- Information indicator on energy balance allows you to plan your energy supply
- Information on the battery condition reduces the likelihood of a vehicle breakdown
- Dead batteries are the main cause of breakdowns. The battery sensor helps prevent this
09/21/2017
| TECHNICAL DATA | |
| Operating voltage | 7,5 - 32V |
| Reverse-polarity voltage | - 28 V / 60 s |
| Test voltage | 27.8 – 28.2 V |
| Operating current1) | ≤ 16 mA |
| Idle current1) | ≤ 255 μA |
| Nominal resistance (shunt) | 68 μΩ |
| Duration load current²) | ± 200 A |
| Maximum current²) | 2,000 A |
| Operating temperature | - 40°C to + 80°C |
| Reheating temperature | + 105°C to + 120°C |
| Storage temperature | - 20°C to + 50°C |
| Defined charge regulator | 36 V / 120 min |
| Jump Start | 48 V / 2 min |
| Load Dump | 58 V / 500 ms |
| Protocol | LIN 2.0 or higher |
| Protection class | IP 6K7 |
| Permissible pole terminal tightening torque | 5 Nm +/- 1 Nm |
| Threaded bolt ground connection | M8 |
| Weight | 119 g |
| Max. battery capacity³) | 255 Ah |
| Mating connector 4) | 872-858-546 |
- Condition: Ta ≤ 40°C; Ubq = 24 V; Ubrun = 28 V
- Typical condition: Ta ≤ 80°C; Ub = 24 V
Typical ground cable: ≥ 70 mm2 - Other configurations on request.
- Extendable on request.
- This accessory is not included.
It may be purchased from Hirschmann Automotive.
10/13/2017
| Intelligent Battery Sensor | 6PK 011 700-001 |
