C140 LED
Construction
C140 LED

C140 LED

03/09/2016
Weltweit erster Kombinationsscheinwerfer in 100% LED von HELLA.
C140 LED

C140 LED

03/09/2016
Kombinationsscheinwerfer C140 mit innovativer LED-Technologie von HELLA.
C140 LED

C140 LED

03/09/2016
Strichzeichnung des innovativen LED-Kombinationsscheinwerfer C140 LED von HELLA.

The HELLA C140 LED is the first combination headlamp in the world that implements all light functions using LED technology. The light functions include low beams, high beams, direction indicators and position lights (implemented as LED light guides). In conjunction with the LED light source, the special free-form reflector provides powerful illumination and the best visibility conditions, even at night. The C140 LED housing is made of aluminum and incorporates cooling fins on the rear side. Thanks to its heavy duty bracket and a cover lens made of hardened, break-proof plastic, the combination headlamp is extremely resistant to vibrations and impacts. The headlamp is suitable for operation in 12- and 24-volt vehicle electrical systems, features a 6-pin DT connector and meets both ECE and SAE requirements. Der C140 LED can be installed both horizontally and vertically.

04/08/2016

The C140 LED is the first combination headlamp in the world that implements all light functions in LED technology. The C140 LED can be used under the most extreme conditions thanks to a stabile, impact-proof aluminum die-cast housing, a cover lens made from break-proof plastic and a special, heavy duty bracket. It is also resistant to vibrations, mechanical shocks, dust and moisture and, as a result, always generates the best light output, even in the demanding conditions posed by the construction industry. In conjunction with the LED light source, the special free-form reflector generates significantly stronger light than conventional headlamps with halogen bulbs. In addition, it is not necessary to replace the LEDs thanks to their long service life. The white light color, similar to daylight, enables fatigue-free work at night. In addition, a lower power consumption than halogen headlamps saves fuel and puts less strain on the alternator. The headlamps are suitable for operation in 12- and 24-volt vehicle electrical systems and meet both ECE und SAE requirements.

04/08/2016

Operating voltage (UB): 10 – 32 V
Recommend tilt angle: 0° – 10°
Light technology: LED
Energy consumption
-Low beam: 12 V / 25 W; 24 V / 25 W
-High beam: 12 V / 40 W; 24 V / 40 W
-Direction indicator: 12 V / 8 W; 24 V / 7 W
-Position light: 12 V / 0.4 W; 24 V / 0.8 W
Reference number: 17.5 protection class: IP 6K9K
Type approval: ECE/SAE
Housing: Aluminum
Light exit area: 140 x 140 mm
Carrier frame: Heavy duty
Connection: DEUTSCH connector, 6-pin
Lens: Polycarbonate
Polarity reversal protection: Yes

Download

 

04/08/2016
  • Print
WORK LIGHT CONFIGURATION TOOL
Picture
Find the right work light quickly and easily with our configurator
ELIVER
Using Eliver, you can find the best beacon for your needs!

Compare the light technologies of work lights and beacons with ELIVER!

ELECTRONICS TOOL
Picture

Experience our electronics products for construction machinery: online and interactive