Bands

• Material: Fe blank, hot-dip/electroplated, stainless steel, spring steel, Cu, CuZn, CuSn, A
• Dimensions: Material thickness: 0.1 mm – 3.0 mm, material width: 3.0 mm – 540 mm

Profiles according to standard and drawing

• Material: Stainless steel, Fe, Al, CuSn, CuZn in pipe or rod form

Stainless steel wires

• Material: Stainless steel containing CrNi
• Dimensions: Diameter: 0.3 mm - 2.5 mm

Enameled wires

• Material: Cu
• Dimensions: Diameter: 0.063 mm - 1.6 mm

Head conductor/resistor material (DIN 17 470/71)

• Round/flat wires and strips
• Material: CuNi, CrAl, NiCr

Precious metal contact materials (as per Hella standard)

• Material: Gold alloys, silver alloys

Electroplating metals

Refined zinc alloy Z 410

• Materials: GD Zn Al4 Cu1 DIN 1743  

Thermoplastics (molding compounds in granulate form)

• Material: PA (polyamide), ABS (acrylonitrile butadiene styrene), PP (polypropylene), PC (polycarbonate), PC+ABS (polycarbonate + acrylonitrile butadiene styrene), PBT (polybutylene terephthalate), POM-C (polyoxymethylene), POM-H (polyoxymethylene), PMMA (polymethyl methacrylate)

Chemicals

• Acids
• Bases
• Special cleaning agents
• Pre-treatment agents
• Galvanized baths and special methods
• Basic chemicals
• Bath additives
• Neutralization agents

Lubricants

• Emulsions
• Hydraulic pressure oil and special lubricants

Paints, enamels and thinners 

Glue

• Epoxy resins
• Polyurethane resin
• Silicone resin and cyanoacrylate

Plastic parts

• Material: Thermoplast and Duroplast
• PVC-TPE hoses
• Weights: 0.02 - 3000 g/pc.
• Specialties: Gear tooth parts, multi-color components

Cast parts

• Material: Al, Mg and Zn alloys
• Weights: 0.05 - 1200 g/pc.

Elastomer molding, profile and stamping parts

• Material: Soft, foam and cellular rubber
• Weights: 0.5 - 750 g/pc.  

Lenses of different kinds

• Material: Molded and cylindrical glass
• Weight: 60 - 1500 g/pc.

Punched and drawn parts

• Material: St, CuSn, Cu, CrNi, Al, CuZn
• Paper-based plastics and laminated fabrics
• Material thickness: 0.2 mm - 2 mm

Extrusion parts

• Material: Al
• Material thickness: 0.8 mm - 1.2 mm
• Cup size: 50/40 mm - 170/150 mm

Wire springs and flexible parts

• Material: Spring steel, CrNi
• Material thickness: 0.2 mm - 1.5 mm

Harnesses

• Insulated single and plastic-sheathed cables
• Material: PVC

Cable terminals/Accessories  

Plug connectors   

Fittings

• Light bulb sockets
• Material: Plastic/metal

Light bulbs

• For headlamps, signal and sundry lamps, displays (12V, 24V)

Turned and cold-impacted parts

• Material: St, Al, CuZn, Cu, Inox
• Dimensions: Diameter: 1.5 mm - 24 mm
• Length: 3 mm - 90 mm

Screws and nuts

• Material: St, CuZn, Inox
• Dimensions: Screws M1.6 - M12, up to 120 mm in 6e tolerance zone, nuts M2 - M38 in 6g tolerance zone

Standard/catalogue and miscellaneous parts

• Spring washers
• Washers
• Rivets and contacts
• Material: CuZn, Cu, St, Al

PCBs

• One-sided and plated through, multi-layer
• Material: FR2, FR4, Flex, CEM1, 400mµ
• Delivery: 100% electrical tested
• Design: Individual PCBs, multi-image boards, stamped/pressed back, scored or link connection
• Surface treatment: Organically passivated, dip-braze lacquered, hot air-levelling, gold-plated

Motors

• 12V and 24V direct-current (DC) motors for automotive applications
• Power: 10 W - 120 W
• Temperature range -40°C to +140°C

Stepper motors

Potentiometers

• Rotary potentiometers
• Slide potentiometers

Mini transformers and transmitters   

High-voltage transformers

• Film technology

Switches and buttons  

Magnets

• Plastic-bonded pressed (wet, dry)

Speakers

• Miniature speakers
• Buzzers
• Pressure chamber speakers

Resistors

• Fixed resistors, metal coating
• Chip resistors
• Resistor networks

Capacitors

• Aluminium electrolytic capacitors (1 ... 1000µF -50 V)
• Tantalum eletrolytic capacitors (0.47...47µF -35V)
• Film capacitors (0.01...1µF -250V)
• Ceramic capacitors (0.01...0.1µF -630V)  

Diodes

• Rectifier diodes up to 5A
• Low-level signal diodes
• Z diodes

Transistors

• Low-level signal transistors
• Field effect transistors
• High-performance-MOS transistors

ICs, MOS and Bipolar

• Standard (digital and analog)
• ASIC (digital and analog)  

Microcomputers   

Housing HC 49U, AT 51 ...

(2... 12 MHz)    

Ceramic resonators

• 1...16 MHz  

Opto components

• Light diodes (LED)
• Liquid crystal elements (LCD)
• Application-specific thick film hybrids

Sensors

• Designs: Wired, SMD
• Temperature range: - 40°C to +85°C (+ 125°C)

Plastic injection molds

Extrusion injection molds    

Die-casting molds

• For special lighting technology parts

 
Progressive and follow-on composite tools

• For punched parts

Models and electrodes

Standard units and accessories

Machining tools

• Mills
• Drills
• Thread cutting tools
• Polishing tools
• Grinding tools
• Diamonds

Hand tools

• Files
• Calipers
• Cutters
• Clamping systems

Garage requirements

• Welding and soldering material
• Ball bearings
• Screw joints
• Electrical tools

Measurement tools and gauges

Polishing and grinding tools

• Emulsions and compounds
• Polishing rings, sisal/cotton discs
• Polishing fabric and paper
• Endless grinding belts
• Grinding wheels in different designs

Personal Protective Equipment (PPE)

• Shoes
• Protective goggles
• Hearing protection
• Dust masks
• Gloves
• Clothing

Packaging and transportation materials

• Corrugated cardboard
• Solid fiberboard
• Laminated corrugated cardboard
• Expanded polystyrene foam (EPS foam, Styrofoam®) packaging components
• Blister and skin packaging
• Deep-drawn plastic parts
• Polyethylene (PE) film and bags
• Soft foam packaging
• Wood, steel pallets and containers
• Adhesive tape

Printed matter

• Forms
• Templates
• Carbon-copy pads
• Tabulated and graph paper
• Envelopes
• Shipping paper
• Adhesive labels on rolls and sheets

Machinery and equipment

Engineering services
Construction services
Building cleaning
etc.

For vehicle front end
For vehicle rear end
For overhead consoles

Vehicle equipment and accessories