The work light product range from HELLA offers the perfect solution for any application scenario, whether close or long-range area lighting, halogen, xenon or LED. Whether close or long-range area lighting, halogen, xenon or LED, one thing is the same for all work lights.
High quality coatings protect the aluminum components of HELLA work lights from salt and chemicals and therefore from corrosion.
Corrosion can ruin the seal on headlights. In the worst case, water can penetrate and destroy the electronics.
The thermal management of HELLA work lights is thoroughly calculated: The heat of the LEDs is evenly distributed and deflected via the housing. If there is a risk of overheating, individual LEDs are automatically dimmed.
Without thermal management, LEDs can very quickly overheat. This makes their service life drop dramatically. Hot spots can deform the entire electronics board, soldering connections can break, causing the complete headlight to fail.
The LED arrangement in HELLA's work lights and the construction of the reflector ensure that no interference occurs from magnetic fields.
LED headlights that are not correctly shielded, produce strong electro-magnetic fields which interfere with the electronic system, radio and GPS.
Before HELLA employees are allowed to enter the LED production, they have to be statically discharged to ensure that no components can be damaged by charging.
Static discharge caused by damaged electronic components can make entire headlights unusable. There is a threat of expensive downtime.
HELLA work lights are protected against reverse polarity. If they are wrongly connected, they will not be damaged.
If a wrongly connected headlight is not protected against reverse polarity, the electronics will be completed destroyed when it is switched on.
Only LEDs that have undergone strict tests are used in HELLA's work lights. The selection guarantees the extremely long service life of the LEDs of up to 60,000 hours.
Resorting to untested, cheap LEDs brings the risk of a shortened service life and malfunction. Then LED technology cannot be used to its full advantage.
The work lights at HELLA are hermetically sealed by high-accuracy glue-dispensing robots. This guarantees that the lens is glued at an optimal angle for the optimum light yield which has been precisely calculated.
Inferior headlights are often glued manually. An irregular adhesive bed can lead to the lens angle, and thus the light yield, not being ideal. If the lens is no longer tight or becomes detached, water can penetrate and make the headlight unusable.
The lens of HELLA work lights is made of high quality, impact and scratch-proof plastic which is 100% suitable for daily use. The light emitted remains homogeneous, even after colliding with a branch or anything similar.
Lenses made of inferior plastic can break and scratch easily. Each scratch leads to undesired light refraction - the more there is, the more irregular the illumination is.
The reflectors of HELLA work lights are calculated in such a way to ensure that the working area is evenly illuminated and the light optimally used.
work lights with an unsuitable light control system illuminate the working area unevenly and waste a large part of the light. Brighter spots distract your eyes, making others details difficult to see.
The Power Beam 1500 from HELLA combines powerful LED light output with an ideal design capable of withstanding tremendous loads. Despite its energy-efficient 22 watt design, the popular compact light easily leaves many conventional halogen work lights standing in the shadows.
Product features:
Power Beam 1500
1GA 996 288-001 Long-range illumination with clear plastic cover lens
1GA 996 288-011 Close-range illumination with structured plastic lens
You can find additional product information and technical specifications at Power Beam 1500 product information
The Module 70 LED Generation IV LED work light is impressive due to its compact design and powerful, uniform light distribution. Three multichip LEDs ensure a 2,500 lumen light output at a low energy consumption of only 30 watts. In addition to the classic close and long range illumination, the Module 70 LED Generation IV is also available with extra wide special illumination.
Product features:
Module 70 LED Gen. IV
1G0 996 476-001 Close-range illumination
1G0 996 476-011 Long-range illumination
1G0 996 476-031 Extra wide special illumination / off-road lighting
You can find additional product information and technical details in the Module 70 LED Generation.IV product information.
The compact Q90 LED from HELLA provides great LED light output paired with a completely new housing design. Four high-power LEDs ensure a 1200 lumen light output at a low energy consumption of only 25 watts. As the forerunner of a new headlamp generation, the Q90 LED is the first to feature the innovative Thermo-Pro plastic housing, which, along with thermal conductivity, also features high impact resistance, weight savings and complete corrosion resistance.
Product features:
Q90 LED
1GA 996 283-001 Close-range illumination with structured plastic lens
1GA 996 283-011 Long-range illumination with clear plastic cover lens
You can find additional product information and technical specifications at Q90 LED product information
Der Flat Beam 500 LED von HELLA ist ein kompakter und robuster LED-Arbeitsscheinwerfer in elegantem Design, der eine extrem hohe Energieeffizienz besitzt – die Leistungsaufnahme der 30 verbauten LEDs beträgt lediglich 7 Watt. Die Gehäusetiefe von lediglich 30 mm ist ideal für Anbausituationen mit wenig Platz. Die Lichtscheibe des Flat Beam 500 wurde speziell entwickelt, so dass selbst bei ebener Wandmontage die Lichtstrahlen im 45° Winkel Richtung Boden geleitet werden. Somit kann auch bei flacher Montage eine gute Ausleuchtung des Arbeitsbereichs sichergestellt werden. Die extrem flache Bauform ermöglicht flexible Anbaumöglichkeiten.
Produktmerkmale:
30 energieeffiziente LEDs
Gehäuse aus glasfaserverstärktem Kunststoff
Multivoltelektronik (9-33V)
550 Lumen Lichtleistung bei nur 7W Stromverbrauch
Farbtemperatur: 5700 Kelvin
Schlagfeste Kunststoffstreuscheibe
Wasser- und staubdichtes System (hochdruckreiniger- und tauchfest)
Gewicht: 400 Gramm
Flat Beam 500 LED
1GA 995 193-001
Weitere Produktinformationen und technische Details finden Sie in der Produktinformation Flat Beam 500 LED
The AP series LED work lights from HELLA have an excellent price / performance ratio.
The AP 1200 LED comes in a rectangular or round version with the following product features:
AP 1200 LED, rectangular
1GA 011 720-041 Close-range illumination with structured plastic lens
AP 1200 LED, round
1G4 011 722-001 Close-range illumination with structured plastic lens
AP 1800 LED, round product features:
AP 1800 LED, round
1G4 013 722-001 Close-range illumination with structured plastic lens°
Information and technical details
AP 1200 LED rectangular version product information
The high-power Module 90 LED pairs energy-efficiency with lighting performance and provides the option of choosing between a surface-mounted and a flush-mounted version. Four high-power multichip LEDs in the surface-mounted version and 12 high-power LEDs in the flush-mounted version give the Module 90 LED up to 3400 lumens of light output. Whether a classic surface-mounted headlamp or a compact flush-mounted headlamp with external electronics, both variants of the Module 90 LED are durable high-power work lights for safe work at night.
Product features:
Module 90 LED
Surface-mounted version
1G0 996 263-031 Close-range illumination with structured plastic lens
1G0 996 263-051 Long-range illumination with clear plastic cover lens
Flush-mounted version
1G0 996 263-001 Close-range illumination with structured plastic lens
1G0 996 263-011 Long-range illumination with clear plastic cover lens
You can find additional product information and technical specifications at
Module 90 LED product information
Module 90 flush-mounted LED product information
Der Flat Beam 1000 LED von HELLA ist ein extrem energieeffizienter LED-Arbeitsscheinwerfer in ultraflacher Bauweise. Durch den reduzierten Energieverbrauch von nur 11 Watt bei 1100 Lumen Lichtleistung wird die Umwelt besonders geschont. Dafür wurde der Scheinwerfer mit dem Green Directory Award als umweltfreundliches Produkt ausgezeichnet. Die flache Bauweise ermöglicht flexible Anbaupositionen. Die 45° Ausleuchtung bringt das Licht selbst ohne Neigung des Arbeitsscheinwerfers in den nahen Arbeitsbereich.
Produktmerkmale:
Flat Beam 1000 LED
1GD 996 193-001
Weitere Produktinformationen und technische Details finden Sie in der Produktinformation Flat Beam 1000 LED
The Ultra Beam LED has the typical characteristics of the top-selling HELLA work light series, but now as an LED version. Nine high-power LEDs give the Ultra Beam LED a full 2200 lumen light output at an energy consumption of only 30 watts. Its convenient design enables a wide variety of possible applications due to its compact dimensions. The combination of tried-and-tested characteristics from the Ultra Beam series paired with the advantages of state-of-the-art light technology are already making the Ultra Beam LED a HELLA classic.
Product features:
Ultra Beam LED
1GA 995 506-001 Close-range illumination with structured plastic lens
1GA 995 506-031 Long-range illumination with clear plastic cover lens
You can find additional product information and technical specifications at Ultra Beam LED product information
The Oval 100 LED from Hella is an LED work light with an oval housing design that can be used in various applications. It features a durable design that allows it to withstand high loads. Thanks to its powerful light output of 1700 lumens, the Oval 100 LED can replace standard halogen work lights (e.g. H3/55 watts) – even though it only consumes 25 watts of power. This makes this work light ideal for use on battery-operated vehicles or on vehicles where the alternator is already under a heavy load. The integrated multifaceted reflector provides particularly even illumination of the work area.
Product features:
Oval 100 LED
1GA 996 661-001
You can find additional product information and technical specifications at Oval 100 LED product information
The HELLA Ultra Beam H3 is a traditional halogen work light. Despite its compact dimensions, the reflector provides excellent light output. An H3 bulb is used as the light source. The black housing of this sturdy work light is made of glass-fiber reinforced plastic, which is acid and corrosion resistant. This also means even heavy loads pose no problem for the light. Thanks to its compact dimensions, the work light can be used universally.
Product features:
Ultra Beam H3
1GA 007 506-001
You can find additional product information and technical specifications at Ultra Beam H3 product information
Der Oval 100 LED Thermo Pro ist die neueste Version der bereits umfangreichen Oval 100 Arbeitsscheinwerfer Serie.
Das neue innovative Kunststoffgehäuse bietet neben der kompletten Korrosionsbeständigkeit auch viele neue Montagemöglichkeiten. Erstmals gibt es den Oval 100 LED auch mit einer seitlichen Drehgelenkbefestigung, welche zusätzliche
Einstellungsmöglichkeiten bei der Montage bieten. Mit 1.700 Lumen Lichtleistung und einer strukturierten Abschlussscheibe ist der Oval 100 LED ideal für die Ausleuchtung des Nahfeldbereiches geeignet.
Produktmerkmale:
Oval 100 LED Thermo Pro
1GA 996 661-031 seitliches Drehgelenk
1GA 996 661-041 Standardhalter
1GA 996 661-501 Drehgelenk unten
Der Mega Beam LED Gen. IV steht trotz kompakter Bauform für eine sehr starke Lichtleistung.
Die Lichtscheibe und der Multifacetten-Reflektor sorgen für eine homogene Nahfeldausleuchtung des Arbeitsbereiches.
Ausgestattet mit 3 Hochleistungs-Multichip-LEDs erzeugt der Mega Beam LED 2.500 gemessene Lumen bei einem geringen Energieverbrauch von lediglich 30 Watt.
Produktmerkmale:
Mega Beam LED Gen. IV
1GM 996 136-501 (Nahfeldausleuchtung, Anbau stehend)
1GM 996 136-511 (Nahfeldausleuchtung, Anbau hängend)
.jpg "Experience beacons interactively using the Eliver tool!")